EasyManua.ls Logo

Siemens SIMATIC IPC MD-57A - Notes on Transport; Before You Set off

Siemens SIMATIC IPC MD-57A
122 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety instructions
3.3 Notes on transport
SIMATIC IPC MD-57A
28 Operating Instructions, 09/2023, A5E52775302-AA
3.3 Notes on transport
Before you set off
Observe the following information when you are traveling with the device:
Back up important data from the SSD.
For safety reasons, switch off the radio component (WLAN) if you cannot be sure that the
transmitted radio waves will not interfere with any electrical or electronic equipment in
your vicinity.
If you want to use your device during a flight, first of all ask the airline company if you are
permitted to do so.
When traveling abroad, ensure that the original power supply can be operated with the
local mains voltage. If it cannot, obtain the appropriate power adapter for the original
power supply. Only use the supplied original power supply and no other voltage
converters!
Note
Using the device in another country
Verify the compatibility of local mains and power cable specifications when using the PG
abroad. If this is not the case, purchase a power cable that complies with the local
conditions. Do not use connection adapters for electrical appliances in order to c
onnect
the device to them.
Transport
Despite the fact that the device is of a rugged design, its internal components are sensitive to
severe vibrations or shock. With just a few simple transport precautions you can help to
create a trouble-free operation.
Switch off the device (see section On/off button (Page 17)).
Disconnect the I/O devices from the device.
Close the display and the interface covers on the back of the device.
Use the integrated handle for brief transportation.
Store the device with all accessories in the backpack supplied for further transport.

Table of Contents

Related product manuals