Maintaining and repairing the device
8.5 Configuring firmware/BIOS
SIMATIC IPC MD-57A
82 Operating Instructions, 09/2023, A5E52775302-AA
8.4.1 Modifying the partitions
We recommend the software tool SIMATIC IPC Image & Partition Creator (as of V3.5.1) for
modifying partitions under Windows.
SIMATIC IPC Image & Partition Creator can be ordered using the Siemens online ordering
system (https://mall.industry.siemens.com
). For more information about SIMATIC IPC
Image & Partition Creator, refer to the corresponding product documentation.
You can find information on partitioning the operating system in the factory state under
"Boot mode and partitions in the delivery state (Page 86)".
8.5 Configuring firmware/BIOS
You can find information on the firmware/BIOS under: "Firmware/BIOS description (Page 98)".
8.6 Backing up data
We recommend the software tool SIMATIC IPC Image & Partition Creator (as of V3.5.1) to
back up data under Windows.
This tool enables easy backup and fast restoration of entire memory cards and drive contents
as well as individual partitions (images).
SIMATIC IPC Image & Partition Creator can be ordered using the Siemens online ordering
system (https://mall.industry.siemens.com
). For more information about SIMATIC IPC
Image & Partition Creator, refer to the corresponding product documentation.
8.7 Recycling and disposal
The devices described in these operating instructions can be recycled thanks to their low level
of pollutants. Contact a certified disposal service company for electronic scrap for
environmentally sound recycling and disposal of your old device, and dispose of it according
to the relevant regulations in your country.
To Next Page
Loading...
