Siemens SIMATIC IPC MD-57A - M.2 Nvme Ssds

Operating the device
6.1 Notes on operation
SIMATIC IPC MD-57A
Operating Instructions, 09/2023, A5E52775302-AA
53
• The USB ports of both types (Type C and Type A) can output a total of 19.5 W + 13.5 W =
33 W together.
• An M.2 module can output a maximum of 3.3 V/2.5 W.
The USB circuit is compliant with the standard "Power Delivery 3.0". Apple's Divider Mode is
not supported.
To use the charging function in battery mode even when the device is switched off, activate
the "USB-C Charging" function in the BIOS "Setup" menu.
Note
To only discharge the battery minimally, deactivate the "USB-C Charging" function again.
6.1.3 M.2 NVMe SSDs
M.2 NVME SSDs with different capacities can be used.
Note
Only use drives recommended by Siemens Aktiengesellschaft
. The order data for the drives
can be found in the catalog.