Siemens SIMATIC IPC PX-39A PRO User Manual (English)

Other manuals for Siemens SIMATIC IPC PX-39A PRO

Questions and Answers:

L
lewiskevinAug 9, 2025
What to do if my Siemens SIMATIC IPC PX-39A PRO Industrial PC is not operational?
- H
  holly72Aug 9, 2025
  If your Siemens Industrial PC is not operational, first, check the power supply, power cord, and power plug to ensure they are correctly connected. Also, verify that the on-off switch is in the correct position. If the device has been transported in cold weather, wait approximately 12 hours before switching it on. Make sure that the device is being operated within the specified ambient conditions.
J
John SotoAug 19, 2025
Why does the external monitor remain dark on my Siemens SIMATIC IPC PX-39A PRO?
- J
  Joseph ShieldsAug 19, 2025
  If the external monitor remains dark, ensure the monitor is switched on and not in 'power save' mode by pressing any key on the keyboard. Increase the screen brightness, as it may have been set too low. Check that the power cord is properly connected to the monitor and the system unit or grounded outlet, and that the monitor cable is correctly connected to both the system unit and the monitor.
M
Mitchell DanielsAug 30, 2025
What to do if the mouse pointer does not appear on the screen of Siemens Industrial PC?
- D
  David PattersonAug 30, 2025
  If the mouse pointer does not appear on the screen, check whether the mouse cord is properly connected to the system unit, including any adapters or expansions used for the mouse cable. Also, ensure that the mouse driver is properly installed and available when you start the user program.

Siemens SIMATIC IPC PX-39A PRO Specifications

General

Power Supply	24 V DC
Operating System	Windows 10 IoT Enterprise
Connectivity	Gigabit Ethernet, Wi-Fi, Bluetooth
Ports	DisplayPort
Expansion Slots	PCIe
Enclosure Type	Aluminum
Operating Temperature	0°C to 50°C