Siemens SIMATIC IPC PX-39A PRO Manual

Configure firmware
2.8 "Exit" tab
Firmware/BIOS description SIMATIC IPC BX-39A, IPC PX-39A, IPC PX-39A PRO
Operating Instructions, 01/2023, A5E51110693-AA
35
2.8 "Exit" tab
2.8.1 Level: "Exit" tab
Exit the Setup utility. You have the following options for saving or discarding the changes
you made:
Calling "Exit"
Choose: "Setup Utility (Page 10)" > "Exit".
Firmware setting
Meaning
Exit Saving Changes
All changes are saved.
The device is restarted with the changed firmware settings.
Save Change Without Exit
All changes are saved.
Setup utility remains open.
Exit Discarding Changes
Setup Utility is closed.
All changes are discarded.
Load Optimal Defaults
The firmware settings are reset to the default values.
The delivery state is restored.
NOTICE:
All current firmware settings are overwritten.
Load Custom Defaults
The user-specific profile with the user-specific firmware settings is loaded.
Requirement:
The firmware settings were previously saved as user-specific profile with "Save Custom De-
faults".
NOTICE:
All current firmware settings are overwritten when loading the user-specific profile with
"Load Custom Defaults".
Save Custom Defaults
The current firmware settings are saved as a user-specific profile (see also "Load Custom
Defaults").
Discard Changes
All changes to the firmware settings are discarded.

Siemens SIMATIC IPC PX-39A PRO Specifications

General

Brand	Siemens
Model	SIMATIC IPC PX-39A PRO
Category	Industrial PC
Language	English