Siemens SIMATIC IPC PX-39A PRO - Enable Trusted Platform Module (TPM)

Firmware/BIOS description SIMATIC IPC BX-39A, IPC PX-39A, IPC PX-39A PRO
Operating Instructions, 01/2023, A5E51110693-AA
43
Enable Trusted Platform Module (TPM)
7
The Trusted Platform Module is a chip that enhances your device with security functions. This
provides improved protection against device manipulation.
You enable use of the Trusted Platform Module in the firmware settings.
NOTICE
Import restrictions for the Trusted Platform Module
Use of the Trusted Platform Module is subject to legal restrictions in some countries and is
not permitted in these countries.
• Always observe the import restrictions of the country in which the device will be
operated.
Procedure
1. Open the "Security" tab. You can find information on this under ""Security" tab (Page 27)".
2. Ensure that the "Available" value is assigned to firmware setting "TPM Availability".
3. Save the changes you made before closing the Setup Utility. You can find information on
this under ""Exit" tab (Page 35)".