Siemens SIMATIC IPC PX-39A PRO - Page 34

Configure firmware
2.7 "Boot" tab
Firmware/BIOS description SIMATIC IPC BX-39A, IPC PX-39A, IPC PX-39A PRO
34 Operating Instructions, 01/2023, A5E51110693-AA
Firmware setting Value Setting in deliv-
ery state
Meaning
Add Boot Options
First
Newly detected boot media are placed at the top of the
boot order.
Auto
x
Newly detected boot media are placed automatically in the
boot order, e.g. dependent on the device path for UEFI
boot media.
Last
Newly detected boot media are placed at the bottom of
the boot order.
USB Boot
Disabled
x
Booting from USB devices is not permitted.
Enabled
Booting from USB devices is permitted.
SATA Boot
Disabled
Booting from SATA devices is not permitted.
Enabled
x
Booting from SATA devices is permitted.
NVMe Boot Options
Disabled
• NVMe boot is not permitted.
• External drivers for "NVMe Boot Options" are not load-
ed.
Enabled
x
• NVMe boot with integrated NVMe driver is permitted.
• External drivers for "NVMe Boot Options" are not load-
ed.
Disabled + NVMe
option ROM
• NVMe boot is not permitted.
• External drivers for "NVMe Boot Options" are loaded.
Enabled + NVMe
option ROM
• NVMe boot is permitted.
• External drivers for "NVMe Boot Options" are loaded.
Add-on PXE drivers
Disabled
PXE option ROMs from add-on network cards are not load-
ed.
Enabled
PXE option ROMs from add-on network cards are loaded.
Timeout
0..1800
0
Delay time during booting in seconds, e.g. so that the user
has time to press the hotkey to get to the firmware selec-
tion menu.