Siemens SIMATIC IPC PX-39A PRO - Page 38

Configuring Intel® Management Engine BIOS Extension (MEBx)
3.2 Options of the MEBx
Firmware/BIOS description SIMATIC IPC BX-39A, IPC PX-39A, IPC PX-39A PRO
38 Operating Instructions, 01/2023, A5E51110693-AA
MEBx setting
Meaning
Password Policy
(only if "Manageability Feature Selec-
tion" = Enabled)
Password policy that specifies the conditions under which the password is permit-
ted to be changed remotely.
The following options can be selected:
• Default Password Only
• During Setup And Configuration
• Anytime
Network Setup
(only if "Manageability Feature Selec-
tion" = Enabled)
The following network settings can be configured:
Intel(R) ME Network Name Settings
• Host Name
• Domain Name
• Shared/Dedicated FQDN
• Dynamic DNS Update
TCP/IP Settings > Wired LAN IPV4 Configuration
• DHCP mode
Activate Network Access
(only if "Manageability Feature Selec-
tion" = Enabled)
Enables the network interface.
This MEBx setting is only available when the network is not enabled.
Unconfigure Network Access
(only if "Manageability Feature Selec-
tion" = Enabled)
Disables the network interface and resets the network settings to their default
values.
Remote Setup And Configuration
(only if "Manageability Feature Selec-
tion" = Enabled)
Displays the current provisioning settings.
Power Control
(only if "Manageability Feature Selec-
tion" = Enabled)
Specifies the power states (S0, S3, S4, S5) of the computer in which MEBx is ena-
bled.
MEBx Exit
Exiting MEBx. The changes are saved.
Further information
More information about MEBx can be found here: Intel® website (https://www.intel.com).