Siemens SIMATIC IPC477E - Opening the BIOS Selection Menu

Technical information
8.6 BIOS description
SIMATIC IPC477E
Operating Instructions, 12/2016, A5E37455003-AB
149
8.6.2
Opening the BIOS selection menu
Procedure
1. Switch on the device or restart the device.
2. Immediately after switching on the device, press the "Esc" button and keep it pressed.
Note
The
following message appears briefly after the device is switched on:
Press ESC for boot options
The BIOS selection setup appears:
The number of buttons in the BIOS selection setup depends on your device version.
The following buttons are available:
Buttons
Function
Continue
Exit selection menu, continue start sequence
Boot Manager Specify the boot media from which to start, for example:
• Hard disk drive
• USB device
Device Management
Start device manager for UEFI boot media