Introduction
Optical link module
6 Operating Instructions, 01/2020, C79000-G8976-C270-06
Further documentation
You will find more information on other SIMATIC NET products that you can use with the
OLM devices in the “SIMATIC NET PROFIBUS networks SIEMENS AG” manual.
Article numbers:
● C79000-G8900-C124-xx German
● C79000-G8976-C124-xx English
● C79000-G8977-C124-xx French
● C79000-G8972-C124-xx Italian
"xx" is a substitute for the current edition.
SIMATIC NET manuals
You will find SIMATIC NET manuals on the Internet pages of Siemens Industry Online
Support (https://support.industry.siemens.com/cs/de/en/
).
SIMATIC NET glossary
Explanations of many of the specialist terms used in this documentation can be found in the
SIMATIC NET glossary.
You will find the SIMATIC NET glossary on the Internet at the following address:
50305045 (https://support.industry.siemens.com/cs/ww/en/view/50305045
)
Unpacking and checking
Do not use any parts that show evidence of damage
If you use damaged parts, there is no guarantee that the device will function according to
the specification.
If you use damaged parts, this can lead to the following problems:
• Injury to persons
• Loss of the approvals
• Violation of the EMC regulations
• Damage to the device and other components
Use only undamaged parts.
1. Make sure that the package is complete.
2. Check all the parts for transport damage.
To Next Page
Loading...
Need help?
General
