Siemens SIMATIC NET - Introduction to the Operating Instructions; Purpose of the Operating Instructions; Validity of the Operating Instructions; Audience for the Manual

Optical link module
Operating Instructions, 01/2020, C79000-G8976-C270-06
5
Introduction
1
CAUTION
To prevent injury, read the manual before use.
Purpose of the Operating Instructions
These operating instructions support you when commissioning PROFIBUS OLM devices
(Optical Link Modules).
Validity of the Operating Instructions
These operating instructions apply to the following devices:
● SIMATIC NET OLM / P11 V4.1
● SIMATIC NET OLM / P12 V4.1
● SIMATIC NET OLM / P22 V4.1
● SIMATIC NET OLM / G11 V4.0
● SIMATIC NET OLM / G12 V4.0
● SIMATIC NET OLM / G22 V4.0
● SIMATIC NET OLM / G12-EEC V4.0
● SIMATIC NET OLM / G11-1300 V4.0
● SIMATIC NET OLM / G12-1300 V4.0
Audience
These Operating Instructions are intended for personnel involved in the commissioning of
PROFIBUS networks with the link modules of the OLM series.
Finding information
To help you to find the information you require more quickly, the manual includes not only
the table of contents but also the following aids:
● Abbreviations/acronyms
● Index