Approvals
Optical link module
84 Operating Instructions, 01/2020, C79000-G8976-C270-06
● ec nC
IECEx classification: Ex ec nC IIC T4 Gc
Certificate no.: IECEx DEK 18.0078X
The products meet the requirements of the following standards:
– IEC 60079-15 (Explosive atmospheres - Part 15: Equipment protection by type of
protection "n")
– IEC 60079-7 (Explosive atmospheres - Part 7: Equipment protection through
increased safety "e")
– IEC 60079-0 (Explosive atmospheres - Part 0: Equipment - General requirements)
Applies to all OLM.
You will find the current versions of the standards in the currently valid IECEx certificates.
EMC directive (electromagnetic compatibility)
The SIMATIC NET products described in these operating instructions meet the requirements
of EU directive 2014/30/EU "Electromagnetic Compatibility" (EMC Directive).
Applied standards:
● EN 61000-6-2 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards -
Immunity for industrial environments
● EN 61000-6-4 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards -
Emission standard for industrial environments
You will find the current versions of the standards in the currently valid EC declaration of
conformity.
RoHS
The SIMATIC NET products described in these operating instructions meet the requirements
of the EC directive 2011/65/EC for the restriction of the use of certain hazardous substances
in electrical and electronic equipment:
Applied standard:
● EN 50581
FM
The product meets the requirements of the standards:
● Factory Mutual Approval Standard Class Number 3611
● FM Hazardous (Classified) Location Electrical Equipment:
Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 and
Non Incendive / Class I / Zone 2 / Group IIC / T4
To Next Page
Loading...
Need help?
General
