Setting Up and Operating the SIMATIC Rack PC 840
3-12
SIMATIC Rack PC 840 Manual
A5E00104826-03
Connecting USB Devices
Single as well as several USB devices (mouse, keyboard or printer) can be
connected to a USB port.
Insert the USB device connector into the USB port.
The device is recognized by the Plug and Play operating system and is then
available.
A USB keyboard can be used to manipulate the BIOS setup.
Note
For repair and maintenance purposes a further USB port is available at the front.
USB ports
Figure 3-8 USB connections
Notice
Operating systems which do not support Plug and Play (for example, Windows NT
4.0), generally do not allow the operation of USB devices.
To Next Page
Loading...
