Configuring the SIMATIC Rack PC 840
5-4
SIMATIC Rack PC 840 Manual
A5E00104826-03
Menu Structure
The screen is divided into four sections. In the top section, you can select the
menu screens [Main], [Advanced], [Security], [Power], [Boot Sequence],
[Version], [Exit]. In the left of the center section you can select various settings or
submenus. Brief help texts appear on the right for the currently selected menu
entry. The bottom section contains information for operator inputs.
Yellow stars to the left of the interface designation (for example, Internal COM 1)
indicate a resource conflict between the interfaces managed by the BIOS. In this
case you should select the default settings (F9) or eliminate the conflict.
You can move between the menu screens using the cursor keys [←] and [→].
Menu Meaning
Main System functions are set here
Advanced An extended sytem configuration can be set here
Security Security functions are set here, for example, a password
Power Power-saving functions can be selected here
Boot Sequence The boot priorities are defined here
Version Information about the programming device (for example, release status)
can be found here
Exit Used for terminating and saving
To Next Page
Loading...
