Installation
2.4 Installing STEP 7 Basic
Getting started with S7-1200
28 Getting Started, 11/2009, A5E02486791-01
Connect the PROFINET cable
The PROFINET cable is a standard CAT5 Ethernet cable with RJ45 connectors that
connects the CPU with your computer or programming device.
① Insert one end of the PROFINET cable to the CPU.
Insert the other end of the cable into the Ethernet port of
your computer or programming device.
2.4 Installing STEP 7 Basic
The installation disk for STEP 7 Basic contains the following SIMATIC software:
STEP 7 Basic for your S7-1200 CPU
WinCC Flexible Basic for the SIMATIC HMI Basic Panels
License Manager for authorizing your SIMATIC software products
Insert the disk into the
drive of your computer.
The installation program
should start automatically.
(If the program does not
start automatically, refer
to the instructions for the
installation disk.)
Choose the language for
the installation dialogs,
and then simply follow the
directions.
You will be given the option for installing the software for multiple languages. Typically,
install only the language that you will be using. You can, however, install any or all of the
other languages. Be aware that installing more than one language requires more disk
space.
To Next Page
Loading...
