Siemens SIMOCODE pro Manual

Index
116
SIMOCODE pro - Fail-Safe Digital Modules
Manual, 11/2017, NEB631679702000/RS-AA/002
Feedback circuit, 45, 54, 59
F-monitoring time, 52
Frequencies, 93
Function of the cascade input (terminal 1), 42
Further information about F-I/O access, 47
Further safety-specific technical data of the DM-F Local
fail-safe digital module, 100
G
Generating circuit diagrams, 60
GG, 105
GSD, 105
H
Hardware fault tolerance HFT, 99, 100, 102
I
Incorrect PROFIsafe address or incorrect PROFIsafe
parameters, 54
Input characteristic, 97, 99
Input with safety relay function, 99
Inputs (binary), 99
Inputs with safety relay function, 97
Integrating SIMOCODE pro V into S7 Distributed
Safety with DM-F PROFIsafe, 53
Integrating SIMOCODE pro V into S7 F/H Systems
with DM-F PROFIsafe, 53
Integrating SIMOCODE pro V into STEP 7 Safety (TIA
Portal) with DM-F PROFIsafe, 53
Integrating the DM-F PROFIsafe into the fail-safe
automation system using PROFIBUS / PROFIsafe or
PROFINET / PROFIsafe, 47
IT, 105
L
LCD, 105
LED, 105
LEDs on DM-F Local, 31
LEDs on DM-F PROFIsafe, 37
Liability disclaimer, 13
LSB, 105
M
Main circuit, 60
Make time (monitored start), 101
Make time (with automatic start), 101
Make time (with automatic start) after power
failure, 101
Manual Collection, 11
MCC, 105
Messages on the fail-safe DM-F Local digital
module, 45
Messages on the fail-safe DM-F PROFIsafe digital
module, 54
Monitoring – Interval for mandatory testing, 54
Monitoring - Interval to mandatory testing - Test
requirement, 45
Monitoring and response times of the DM-F LOCAL
fail-safe digital module, 101
Monitoring and response times of the DM-F PROFIsafe
fail-safe digital module, 102
Monitoring the feedback circuit in the fail-safe
controller, 54
Mounting, 93
Mounting on a standard rail, 24
Mounting position, 93
MSB, 105
MTTFd, 99, 100, 102
N
Newsletter, 12
No module voltage, 45, 54
Non-safety-related function, 18
O
Off-delay after opening of the safety circuits, 101
Off-delay in case of power failure, 101
OM, 105
OPD, 105
Operating range, 93
Option package, 50
Order nos., 16
Orientation aids, 11
OSSD, 105
P
PCS, 105, 106
PDM, 105
PELV, 105
Performance Level, 15
Permissible ambient temperature, 93
PFD, 105
PFDavg, 106

Siemens SIMOCODE pro Specifications

General

Protection Class	IP20
Mounting Type	DIN rail mounting
Rated Operational Voltage	24 V DC
Rated Current	Up to 820 A
Protection Functions	Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range	-25°C to +60°C
Communication Protocols	PROFIBUS DP, PROFINET, Modbus RTU
Analog Outputs	Up to 2
Temperature Monitoring	PTC/KTY, RTD (PT100/PT1000)
Digital Outputs	Relay outputs, Solid-state outputs
Analog Inputs	0/4-20mA, PT100/PT1000