General information and safety notes
1.4 Installation notes
BA 2030
Operating Instructions, 02/2021, A5E37880173A/RS-AM
11
In the sense of the current EC Machinery Directive 2006/42/EC, gea
rboxes are components
designed for installation in plants and machines.
Based on the area of validity of the directive, commissioning is prohibited until it has been
absolutely identified that the end product is in conformance with this directive.
The SIMOGEAR gearboxes described in these operating instructions have been designed for
stationary use in general engineering applications.
Unless otherwise agreed, the gearboxes have been designed for use in plants and equipment
in industrial environments.
The gearboxes have been built based on state-of-the-art technology and are shipped in an
operationally reliable condition. Changes made by users could affect this operational
reliability and are forbidden.
The data on the rating plate assumes an insta
llation altitude of up to 1 000 m above sea level.
The permissible ambient temperature is stamped on the rating plate.
For different installation altitudes and ambient temperatures, contact Technical Support.
The gearboxes have been designed solely for the application described in the Technical data
(Page 103). Do not operate the gearbox outside the specified power limit. Other operating
conditions must be contractually agreed.
Do not climb on the gearbox. Do not place any objects on the gearbox.
1.4 Installation notes
Prerequisites for smooth, vibration-free running
• Stable foundation design
• Precise alignment of the machine
• Correct balancing of the parts to be mounted on the shaft extension
• Compliance with vibration severity values according to ISO 20816-1
To Next Page
Loading...
