Siemens SIMOGEAR BA 2030

Technical data
10.6 Mounting positions
BA 2030
Operating Instructions, 02/2021, A5E37880173A/RS-AM
149
10.6.7 Tandem gearboxes - Intermediate helical gearboxes
Only operate the gearbox in the mounting position specified on the rating plate. This ensures
that the correct quantity of lubricant is provided. The symbols are shown for the standard
mounting position.
Note
Horizontal operating position
In a horizontal operating position the bulging part of the housing of the intermediate helical
gearbox generally faces vertically downwards.
Note
Helical gearbox size 19
The helical gearbox si
ze 19 is lubricated for life. There is no opening to check the oil level.
In vertical mounting positions the gearbox is equipped with a breather valve.