Technical data
10.7 Oil quantities
BA 2030
Operating Instructions, 02/2021, A5E37880173A/RS-AM
151
10.7 Oil quantities
Damage to the gearbox caused by incorrect oil quantities
The oil quantities listed in the tables are guide values for changing the oil. They serve, for
example, for lubricant storage and procurement.
The precise values depend on the number of stages and transmission ratio of the gearbox.
The specified oil quantities are valid for the standard mounting position.
- intermediate helical gearbox
The oil quantity is specified for every individual gearbox and is valid for the standard
mounting position.
Gearbox in special mounting position
The gearbox is intended for a specific rotation angle and is delivered with the correct quantity
of oil for this purpose.
You will find information regarding oil quantity and type of oil on the rating plate.
To Next Page
Loading...
