Commissionin g
5.5 Options of the VLplus heavy-duty bearing system
BA 2030
64 Operating Instructions, 02/2021, A5E37880173A/RS-AM
5.5.2 Dry-well version with oil sensor
Please refer to the separate operating instructions for the oil level sensor.
The oil sensor can also be deployed for ATEX version gearboxes.
The oil sensor operates with a disconnector.
The disconnector must be approved for the ATEX version.
onnector is installed outside the hazardous area.
Observe the operating instructions of the disconnector.
Functional restriction of the sensor
Note the following:
• The sensor must be free of any dirt and residues.
• Do not damage the cables or the insulation.
• Lay the supply line with strain relief.
Avoid strong bending loads, buckling and point mechanical loads.
To Next Page
Loading...
