Technical description
2.5 Surface treatment
BA 2030
22 Operating Instructions, 02/2021, A5E37880173A/RS-AM
Corrosiveness category C1 for normal environmental stress
1-component hydro paint, top coat
• Indoor installation
• Heated buildings with neutral atmospheres
• Resistance to greases and some resistance to mineral
oils, aliphatic solvents
• Standard paint for gearbox housings made of cast
iron
Corrosiveness category C2 for low environmental stress
2-component - polyurethane top coat
• Indoor and outdoor installation
• Unheated buildings with condensation, production
areas with low humidity, e.g. warehouses and sports
facilities
• Atmospheres with little contamination, mostly rural
areas
• Resistance to greases, mineral oils and sulfuric
acid (10 %), caustic soda (10 %) and some resistance
Corrosiveness category C3 for medium environmental stress
2-component epoxy zinc phosphate base
coat,
2-component polyurethane top coat
• Indoor and outdoor installation
• Production areas with high humidity and some air
contamination, e.g. food production areas, dairies,
breweries and laundries
• Urban and industrial atmospheres, moderate
contamination from sulfur dioxide, coastal areas with
low salt levels
•
Resistance to greases, mineral oils, aliphatic solvents,
sulfuric acid (10 %), caustic soda (10 %)
To Next Page
Loading...
