Installation
4.2 General information on installation
BA 2030
30 Operating Instructions, 02/2021, A5E37880173A/RS-AM
Overheating caused by solar radiation
Overheating of the gearbox due to exposure to direct sunlight.
Provide suitable protective equipment such as covers or roofs. Prevent heat accumulation.
Malfunction resulting from foreign objects
The operator must ensure that no foreign objects impair the function of the gearbox.
Damaged components impair the correct function of the gearbox
If any components are damaged, the correct function of the gearbox will no longer be
ensured.
Do not install any damaged gearbox components.
Violation of the maximum permissible oil sump temperature
The oil sump temperature may be exceeded if the temperature monitoring equipment is
incorrectly set.
An alarm must be output when the maximum permissible oil sump temperature is reached.
The geared motor must be switched off when the maximum permissible temperature is
exceeded. If the geared motor is shut down, then this can cause the machine to come to a
Destruction of the machine
The machine can be mechanically destroyed if the vibration values in operation are not
maintained in accordance with ISO 20816-1.
• In operation, maintain vibration values in accordance with ISO 20816-1.
Exercise particular care during mounting and installation. The manufacturer cannot be held
liable for damage caused by incorrect mounting and installation.
Make sure that there is sufficient space around the gearbox or geared motor for mounting,
maintenance and repair.
To Next Page
Loading...
