See also
Guide for Spares on Web (
http://support.automation.siemens.com/WW/news/en/25248626)
Terminal box
If several terminal boxes are mounted on the machine, please also indicate the type
designation of the terminal box in addition to details of part designation and part number
according to the legend, as well as type and serial number of the motor when ordering spare
parts.
Example
● Terminal box type
● Terminal box cover (part 20.30 )
● Serial number of the motor
● Machine type
Rolling-contact bearings
When ordering roller bearings, in addition to the bearing identification code, the supplementary
specifying code is also necessary for the bearing version. Both of these codes are stamped
on the lubricant plate and specified in the motor documentation, or can also be taken from the
installed bearings.
If insulated rolling bearings are fitted, use insulated rolling bearings of the same type as spare
parts. This will prevent any bearing damage being caused by bearing currents.
Anti-condensation heating
Please contact to the Service Center (Page 111) for spare parts.
WARNING
Explosion hazard due to improper maintenance
If repairs to the anti-condensation heating are not carried out correctly, e.g. if unauthorized
or untested spare parts are used, this can result in explosions during operation in a potentially
explosive gaseous atmosphere. This can result in death, serious injury, or material damage.
● Repairing and mounting the anti-condensation heating and the subsequent routine testing
must always be undertaken by experts from the service center (Page 111), because this
work requires extensive specialist knowledge.
● Only authorized and tested spare parts may be used.
Spare parts
10.2 Ordering spare parts via the Internet
SIMOTICS HV C 1NB1402-2AA84-4CA0-Z
102 Operating Instructions 06/2018
To Next Page
Loading...
Need help?
General