The machine design basically complies with the subsequent standards. Please refer to the EU
Declaration of Conformity for the versions of the harmonized standards referenced.
Table 3-1 Machine design
Feature Standard
Rating and performance IEC/EN 60034‑1
Degree of protection IEC/EN 60034‑5
Cooling IEC/EN 60034‑6
Type of construction IEC/EN 60034‑7
Terminal markings and direction of rotation IEC/EN 60034‑8
Noise emission IEC/EN 60034‑9
Starting characteristics, rotating electrical machines IEC/EN 60034‑12*
Vibration severity grades IEC/EN 60034‑14
Vibration limits DIN ISO 10816-3
* For machines in line operation only
See also
Quality documents (Page 115)
The following standards additionally apply for explosion-protected machines:
Table 3-2 Machine version with type of protection Ex db
Characteristic Standard
Type of protection Ex db GB 3836.1
GB 3836.2
Rating plate
The rating plate shows the identification data and the most important technical data. The data
on the rating plate and the contractual agreements define the limits of proper usage.
Line operation
The motor is supplied from the line system.
If you connect the machine to a converter, the machine can be damaged. Operate the machine
only on the electrical supply system.
Cooling
The cooling system is designed as a closed, internal cooling circuit. The heat lost from the
machine is dissipated to the ambient air via the machine's surface. A shaft-mounted fan moves
the cooling air in the primary circuit. Movement of the cooling air in the secondary circuit is
driven by a shaft-mounted fan.
Description
SIMOTICS HV C 1NB1402-2AA84-4CA0-Z
20 Operating Instructions 06/2018
To Next Page
Loading...
Need help?
General