Assembly
5
Observe the following when carrying out any work on the machine:
● Comply with the general safety instructions (Page 13)
● Comply with the applicable national and sector-specific regulations.
● When using the machine within the European Union, comply with the specifications laid
down in EN 50110‑1 regarding safe operation of electrical equipment.
Loss of conformity with European directives
In the delivery state, the machine corresponds to the requirements of the European directives.
Unauthorized changes or modifications to the machine lead to the loss of conformity with
European directives and the loss of warranty.
Explosion hazard when making modifications to the machine
Substantial modifications to the machine are not permitted – or may only be performed by the
manufacturer. Otherwise an explosion can occur in an explosive atmosphere. This can result
in death, serious injury or material damage.
● If necessary, please contact the service center.
SIMOTICS HV C 1NB1402-2AA84-4CA0-Z
Operating Instructions 06/2018 39
To Next Page
Loading...
Need help?
General