Siemens SIMOTICS S-1FK2 - Decommissioning, Removing the Motor

11.2 Decommissioning, removing the motor
The removal of the motor must be performed and/or supervised by quali󹪝ed personnel with
appropriate expert knowledge.
Precondition
Removing the motor must be performed and/or supervised by quali󹪝ed personnel with
appropriate expert knowledge.
Removing the motor from the machine
Procedure
1. Check to make sure that the motor is voltage-free on all sides.
2. Let the motor cool down enough so that you are not burnt.
3. Disconnect all electrical connections. Information on this is provided in Chapter "Handling
the quick-action locking (Page 77)".
4. Remove the 󹪝xing elements from the motor.
5. Transport the motor to a suitable location for disposal.
You have removed the motor.
❒
Dispose of the motor in accordance with the local legal requirements.
Decommissioning and disposal
11.2 Decommissioning, removing the motor
SIMOTICS S-1FK2 synchronous motors for SINAMICS S120
102 Operating Instructions, 02/2022, A5E46089564B AD