Siemens SIMOTICS S-1FK2 User Manual

Introduction
Keeping the documentation safe
This documentation should be kept in a location where it can be easily accessed and made
available to the personnel responsible.
Target group and use
Target group
These Operating Instructions are intended for installation engineers, commissioners, machine
operators, and service and maintenance personnel.
Utilization phase
Planning and engineering phase, implementation phase, installation and commissioning
phase, application phase, maintenance and service phase.
About these operating instructions
These operating instructions apply to the SIMOTICS S-1FK2 servo motor, referred to as "1FK2" in
this document.
The Operating Instructions provide information about the components that enable the target
group to install, set up, test, commission, operate, and troubleshoot the products and systems
correctly and safely.
The operating instructions inform you about how to handle the 1FK2 from delivery to 󹪝nal
disposal.
You will 󹪝nd additional information in the con󹪝guration manual for the 1FK2.
Before you start using the motor, you must read these Operating Instructions to ensure safe,
problem-free operation and to maximize the service life.
Siemens strives continually to improve the quality of information provided in these Operating
Instructions.
• If you 󹪝nd any mistakes or would like to o󹪜er suggestions about how this document could be
improved, contact the Siemens Service Center.
• Always follow the safety instructions and notices in this Product Information.
The warning notice system is explained on the rear of the inside front.
Text features
In addition to the notes that you must observe for your own personal safety as well as to avoid
material damage, in this document you will 󹪝nd the following text features:
SIMOTICS S-1FK2 synchronous motors for SINAMICS S120
Operating Instructions, 02/2022, A5E46089564B AD 3

Siemens SIMOTICS S-1FK2 Specifications

General

Brand	Siemens
Model	SIMOTICS S-1FK2
Category	Engine
Language	English