Siemens SIMOTICS S-1FK2 User Manual

3.4 Permissible radial and axial forces
Permissible axial forces
Type Axial force, static
1)
F
A stat
/ N
1F☐2☐03 75
1F☐2☐04 100
1F☐2105 120
1F☐2106 200
1F☐2205 120
1F☐2206 200
1F☐2208 300
1F☐2210 450
1)
The speci󹪝ed axial forces are determined by the spring loading and therefore also apply for motors with
holding brake.
Note
Applications with an angular toothed pinion directly on the motor shaft are not permitted if the
permissible axial forces are exceeded.
Permissible radial forces
As a result of the bearing arrangement, the 1F☐2 is designed for aligned forces. Forces such as
these occur for belt drives, for example.
All radial forces always refer to aligned forces.
NOTICE
Motor damage caused by circulating forces
Circulating forces can cause bearing motion, and therefore damage the motor.
• Circulating forces are not permissible.
Mounting and options
3.4 Permissible radial and axial forces
SIMOTICS S-1FK2 synchronous motors for SINAMICS S120
36 Operating Instructions, 02/2022, A5E46089564B AD

Siemens SIMOTICS S-1FK2 Specifications

General

Brand	Siemens
Model	SIMOTICS S-1FK2
Category	Engine
Language	English