Siemens SIMOTICS S-1FK2 - Repair, Replacing the Motor

10.3 Repair, replacing the motor
This chapter describes the exchange of a motor in short form
Precondition
The new motor has the same article number as the motor to be replaced.
Note
You can replace a motor with a singleturn encoder AS22DQC (1FK2☐☐☐_☐☐☐☐☐-☐S☐☐)
with an otherwise identical motor with a multiturn encoder AM22DQC (1FK2☐☐☐_☐☐☐☐☐-
☐M☐☐) without recommissioning.
Note
If you want to replace the motor with a motor with a di󹪜erent article number, you must perform
converter commissioning after replacing the motor.
You will 󹪝nd more precise information in the manual for the converter in question
Maintenance
10.3 Repair, replacing the motor
SIMOTICS S-1FK2 synchronous motors for SINAMICS S120
98 Operating Instructions, 02/2022, A5E46089564B AD