Preparing for use
4.5 Transport and storage
1LA5/6/7/9, 1LG4/6, 1MA6/7, 1MB..1/2/3/4/5 - SH 63 ... 355
36 Operating Instructions, 06/2018, A5E44455710A
Damage can occur if incorrectly stored.
Take all precautions to protect the motor under extreme climatic conditions, e.g. salt-laden
and/or dusty, moist/humid atmospheres.
Choose a dry storage location which is safe from flooding and free from vibration. Repair any
damage to the packaging before putting the equipment into storage if this is necessary to
ensure proper storage conditions. In order to ensure protection against ground moisture,
locate machines, equipment and crates on pallets, wooden beams or foundations. Prevent
equipment from sinking into the ground. Do not impede air circulation under the stored items.
Covers or tarpaulins used to protect the equipment against the weather must not come into
contact with the surfaces of the equipment. Use wooden spacer elements to ensure that air
can circulate freely around the equipment.
The storage rooms must provide protection against extreme weather conditions. They must
be dry, free from dust, frost and vibration and well ventilated.
For transport, the bare surfaces (shaft ends, flange surfaces, centering edges) should be
coated with an anti-corrosion agent which will last for a limited amount of time (<6 months).
Apply suitable anti-corrosion measures for longer storage times.
Open any condensation drain holes to drain the condensation depending on the
environmental conditions, every six months at the latest.
The materials used are specially designed for the temperature range required by the
customer. The relevant temperature limits are specified on the rating plate.
To Next Page
Loading...
