Quantity structure of DRIVE-CLiQ components
The following maximum number of DRIVE-CLiQ components can be connected to the
SIMOTION D410-2:
●
Max. 8 Terminal Modules, of these max.
– 3 TM15, TM17, TM41
– 8 TM15 DI/DO, TM31, TM120, TM150
– 1 TM54F
● Max. 5 encoder systems
(SMx Sensor Modules or encoders/motors with DRIVE-CLiQ interface)
● Max. 1 DMC20/DME20
You require a DRIVE-CLiQ hub module (DMC20/DME20) or a CUA32 to connect more than
one encoder system via DRIVE-CLiQ.
Commissioning (software)
7.20 Quantity structures
SIMOTION D410-2
Commissioning and Hardware Installation Manual, 01/2015 249
To Next Page
Loading...
