Connecting
4
4.1 General Overview
Overview
The
SIMOTION D410‑2 has a number of interfaces that can be used for connecting the power
supply and for communication with the other components of the system.
● The different SINAMICS components are interconnected via DRIVE‑CLiQ.
● Actuators and sensors can be connected to the inputs/outputs.
● The SIMOTION D410‑2 can be connected to PROFIBUS DP, MPI, Ethernet, and
PROFINET (D410-2 DP/PN only) for communication purposes.
SIMOTION D410-2
Commissioning and Hardware Installation Manual, 01/2015 45
To Next Page
Loading...
