Local measuring input Global measuring input
Measuring on virtual axes no yes
Measuring on axes attached to a
different drive unit
no yes
1)
Measurement jobs must be issued individually for each measurement. Several interpolation cycle clocks lie between two
measurements.
2)
The measuring is activated just once and runs cyclically until deactivated.
SIMOTION Utilities & Applications includes, for example, a tool with the following functions:
●
Estimate of the time between initiating a measurement job to the time at which the
measuring input job in the drive acts
● Estimate of the minimum time between 2 measurement jobs.
SIMOTION Utilities & Applications is part of the scope of delivery of SIMOTION SCOUT.
Table A-2 Measuring inputs - Overview of quantity structures and functionality
Maximum available quantity structure
Functionality/device D410,
CU310,
CX32
D4x5,
CU320
CX32‑2 D410-2,
CU310-2
D4x5‑2
‑ X122/X132
‑ X142
TM15 TM17 High
Feature
Maximum number of
measuring input inputs
3 6 4 8 - 8
- 8
24 16
Can be configured as a lo‐
cal measuring input
x x x x - 8
- 0
- -
Can be configured as a
global measuring input
x x x x - 8
- 8
x x
Configuring drive-related I/Os (without symbolic assignment)
A.2 Local and global measuring inputs
SIMOTION D410-2
Commissioning and Hardware Installation Manual, 01/2015 319
To Next Page
Loading...
