Siemens SINAMICS G110 - Page 47

04/2005 Commissioning
SINAMICS G110 Operating Instructions
6SL3298-0AA11-0BP0
47
NOTES
¾ P0308 & P0309 are only visible if P0003 = 3. For detailed information, please
see the Parameter List.
¾ P0307 indicates kW or HP depending upon the setting of P0100. For detailed
information, please see the Parameter List.
¾ Changing motor parameters is not possible unless P0010=1.
¾ Ensure that the motor is configured correctly to the inverter, i.e. in the above
example delta terminal connection is for 230 V.