General Engineering Information for SINAMICS
Engineering Information
SINAMICS Engineering Manual – November 2015
Ó Siemens AG
262/528
European standards / international standards (continued)
Standard Description
HD 60364-x-x
IEC 60364-x-x
DIN VDE 0100-x-x
VDE 0100-x-x
Low-voltage electrical installations;
Part 200: Definitions
Part 410: Protection for safety, protection against electric shock
Part 420: Protection for safety, protection against thermal effects
Part 430: Protection of cables and cords against overcurrent
Part 450: Protection for safety, protection against undervoltages
Part 470: Protection for safety; Application of protective measures for safety
Part 5xx: Selection and erection of electrical equipment
Part 520: Wiring systems
Part 540: Earthing arrangements, protective conductors and protective bonding conductors
Part 560: Safety services
EN 60439 / 61439
IEC 60439 / 61439
Low-voltage switchgear and controlgear assemblies;
Part 1: Type-tested and partially type-tested assemblies
EN 60529
IEC 60529
DIN EN 60529
VDE 0470-1
Degrees of protection provided by enclosures (IP code)
EN 60721-3-x
IEC 60721-3-x
DIN EN 60721-3-x
Classification of environmental conditions
Part 3-0: Classification of groups of environmental parameters and their severities; Introduction
Part 3-1: Classification of groups of environmental parameters and their severities; Storage
Part 3-2: Classification of groups of environmental parameters and their severities; Transport
Part 3-3: Classification of groups of environmental parameters and their severities; Stationary use
at weatherprotected locations
EN 60947-x-x
IEC 60947-x-x
DIN EN 60947-x-x
VDE 0660-x
Low-voltage switchgear and controlgear
EN 61000-6-x
IEC 61000-6-x
DIN EN 61000-6-x
VDE 0839-6-x
Electromagnetic compatibility (EMV)
Part 6-1: Generic standards; Immunity for residential, commercial and light-industrial
environments
Part 6-2: Generic standards; Immunity for industrial environments
Part 6-3: Generic standards - Emission standard for residential, commercial and
light-industrial environments
Part 6-4: Generic standards; Emission standard for industrial environments
EN 61140
IEC 61140
DIN EN 61140
VDE 0140-1
Protection against electric shock; Common aspects for installation and equipment
EN 61800-2
IEC 61800-2
DIN EN 61800-2
VDE 0160-102
Adjustable speed electrical power drive systems:
Part 2: General requirements - Rating specifications for low voltage adjustable
frequency a.c. power drive systems
EN 61800-3
IEC 61800-3
DIN EN 61800-3
VDE 0160-103
Adjustable speed electrical power drive systems:
Part 3: EMC requirements and specific test methods
EN 61800-5-x
IEC 61800-5-x
DIN EN 61800-5-x
VDE 0160-105-x
Adjustable speed electrical power drive systems;
Part 5: Safety requirements;
Part 5-1: Electrical, thermal and energy
Part 5-2: Functional
EN 62061
IEC 62061
DIN EN 62061
VDE 0113-50
Safety of machinery;
Functional safety of electrical, electronic and programmable
electronic control systems
North American standards
Standard Description
UL 508 Industrial Control Equipment
UL 508A Industrial Control Panels
UL 508C Power Conversion Equipment
CSA C22.2 No. 14 Industrial Control Equipment
To Next Page
Loading...
