Drive Dimensioning
Engineering Information
SINAMICS Engineering Manual – November 2015
Ó Siemens AG
518/528
7th step
Definition of the protection
system
Further notes and alternatives
A protection system
must be defined when
work has to be carried
out on the converter
and/or cables after
power OFF when the
rotor is still revolving.
The protection system depends on
the operating conditions and
application.
See above or Catalog D86.2 / page 1/4 and ff.
Guide for designing a drive with an HT-direct motor and a SINAMICS converter
To Next Page
Loading...
