Siemens SINUMERIK 802C base line User Manual

Installing the Control System
2-20 SINUMERIK 802C base line
Start-Up
Table 2–16 Electrical parameters of the digital outputs
Parameter Value Unit Note
“1” signal, nominal voltage
Voltage drop
24
max. 3
V
V
“1” signal, output current 0.5 A Simultaneity factor
0.5 per 16 outputs
“0” signal, leakage current max. 2 mA

Siemens SINUMERIK 802C base line Specifications

General

Brand	Siemens
Model	SINUMERIK 802C base line
Category	Controller
Language	English