Siemens SINUMERIK 802D - 1.3 Key definition of the machine control panel

09.01 2. Create/Edit Program
© Siemens AG, 2001. All rights reserved
2-17
SINUMERIK 802D Milling ISO Dialect M (ISF) - Edition 09.01
Block Search/Numbering
Block search
Prerequisite:
Existing program is open.
Search
Text
Line
no.
Enter search text.
You can choose between text
or line number ("N..." must be
entered for block number).
OK
Start search.
Note
At the start of the search for text, it is possible to choose
between
• Search from the cursor position, or
• Search from the block start.
Block numbering
Prerequisite:
Program is open.
Numbering
The block numbers of the
complete program are
renumbered in increments of
10.