7. Program Preparatory Functions 09.01
7-40 © Siemens AG, 2001. All rights reserved
SINUMERIK 802D Milling ISO Dialect M (ISF) - Edition 09.01
Feed in Continuous-Path Mode, G64
N05 ...
N10 G1 Z-7 F300
N20
G64
N30 Y40
G64 Continuous-Path Mode
The function works with predictive speed control (Look
Ahead), i.e. the tool path velocity is reduced sufficiently so
that an optimum traversing velocity is attained for short
travel motions per block.
G64
Optimization of the manufacturing results using continuous path operation
To Next Page
Loading...
Need help?
General
