7. Program Preparatory Functions 09.01
7-42 © Siemens AG, 2001. All rights reserved
SINUMERIK 802D Milling ISO Dialect M (ISF) - Edition 09.01
Subroutine Call, M98/M99
N20
M98 Pxxxxyyyy
N40
M99 Pxxxx
M98 Pxxxxyyyy Subroutine call: a subroutine with the
number yyyy is repeated xxxx-times.
M99 Pxxxx Subroutine end: return to the main program
at block number N... .
The subroutine call must be made in a dedicated NC block.
To Next Page
Loading...
