Index 0 = Size of the battery-backed part program / cycle program memory
Index 1 = Reserved
Index 2 = Reserved
18353 MM_M_FILE_MEM_SIZE EXP, N02 S7
- Memory capacity for machine manufacturer's cycles/files DWORD PowerOn
-
808d-me42 3 160, 0, 0 0 256 0/0
808d-me62 3 160, 0, 0 0 256 0/0
808d-te42 3 160, 0, 0 0 256 0/0
808d-te62 3 160, 0, 0 0 256 0/0
808d-mte40 3 160, 0, 0 0 256 1/1
808d-mte60 3 160, 0, 0 0 256 1/1
Description: The machine data is not available or not defined for PowerLine control models.
Memory for machine manufacturer files in the passive file system ( in kbyte ).
The machine manufacturer's files are in this memory area of the passive file system.
E.g.: cycle programs
The settable values depend on the hardware and software configurations.
The settable size of the memory is, apart from the upper limit value,
determined by the MD18230 $MN_MM_USER_MEM_BUFFERED.
Index 0 = Minimum size of the battery-backed (persistent) part program / cycle program
memory
Index 1 = Reserved
Index 2 = Reserved
18354 MM_S_FILE_MEM_SIZE EXP, N02 -
- Size of the Siemens cycle program memory
[0] Size of the volatile cycle program memory
[1] Size of the non-volatile Siemens cycle program memory
[2]
Size of
the volatile memory for system files (NRK fault file, etc.)
DWORD PowerOn
-
808d-me42 3 64, 0, 10 0 256 0/0
808d-me62 3 64, 0, 10 0 256 0/0
808d-te42 3 64, 0, 10 0 256 0/0
808d-te62 3 64, 0, 10 0 256 0/0
808d-mte40 3 256, 0, 10 0 512 7/2
808d-mte60 3 256, 0, 10 0 512 7/2
Description: Memory for the control manufacturer's files in the passive file system ( in KB )
The control manufacturer's files are in this memory area of the passive file system,
e.g: cycle programs, system files
The settable values depend on the hardware and software configurations.
The settable size of the memory, apart from the upper limit value
for index = 0 is limited by the size of the available nonvolatile memory (see siehe
MD18230$MN_MM_USER_MEM_BUFFERED),
for index = 1, is limited by the size of the available non-volatile memory (see MD18210
$MN_MM_USER_MEM_DYNAMIC),
for Index = 2, is limited by the wize of the internally available buffered (SRAM)
memory.
Index 0 = Size of the nonvolatile cycle program memory
Machine data
3.2 General machine data
Parameter Manual
100 Parameter Manual, 08/2015, 6FC5397-8EP40-0BA1
To Next Page
Loading...
Need help?
General
