Siemens SINUMERIK 808D ADVANCED - Page 316

NC setting data
Parameter Manual
316 Operating Instructions, 08/2013, 6FC5397-8EP40-0BA0
Description:
Related to ...
SD42512 $SC_IS_SD_MAX_PATH_JERK
Description: SD42510 $SC_SD_MAX_PATH_JERK is included in the limit calculations if SD42512
$SC_IS_SD_MAX_PATH_JERK=TRUE
Related to ...
SD42510 $SC_SD_MAX_PATH_JERK (SD for additional limitation of (tangential)
path jerk)
Description: Traverse path distance from which the feed is reduced before the corner with
G62.
Description: Traverse path distance up to which the feed remains reduced after a corner
with G62.
Description: Override used to multiply the feed at the corner with G62.
42510 SD_MAX_PATH_JERK -B2
m/s³ maximum path-related jerk as setting data DOUBLE Immediately
-
- - 100000., 100000.,
100000., 100000....
1.e-9 - 1/1
42512 IS_SD_MAX_PATH_JERK -B2
- Evaluate SD42510 $SC_SD_MAX_PATH_JERK BOOLEAN Immediately
-
- - FALSE, FALSE,
FALSE, FALSE,
FALSE, FALSE...
0 - 1/1
42520 CORNER_SLOWDOWN_START --
mm Start of feed reduction at G62. DOUBLE Immediately
-
- - 0., 0., 0., 0., 0., 0., 0.,
0....
0.0 - 1/1
42522 CORNER_SLOWDOWN_END --
mm End of feed reduction at G62. DOUBLE Immediately
-
- - 0., 0., 0., 0., 0., 0., 0.,
0....
0.0 - 1/1
42524 CORNER_SLOWDOWN_OVR --
% Feed override reduction at G62 DOUBLE Immediately
-
- - 0., 0., 0., 0., 0., 0., 0.,
0....
0.0 - 1/1