Pin Signal name Type Meaning
14 N.C. - Not assigned
15 N.C. - Not assigned
Connector designation: X62
Connector type: 12-pin plug connector
Special feature: No galvanic isolation
Max. cable length: 5 m
Table 7-46 Assignment of connector X62
Pin Signal name Type Meaning
1 P5HW V 5 V power supply
2 M V Ground
3 HW1_A I Handwheel 1 pulses track A
4 HW1_XA I Handwheel 1 pulses track A (negated)
5 HW1_B I Handwheel 1 pulses track B
6 HW1_XB I Handwheel 1 pulses track B (negated)
7 P5HW V 5 V power supply
8 M V Ground
9 HW2_A I Handwheel 2 pulses track A
10 HW2_XA I Handwheel 2 pulses track A (negated)
11 HW2_B I Handwheel 2 pulses track B
12 HW2_XB I Handwheel 2 pulses track B (negated)
Digital inputs and outputs X111, X112, X113, X114
You can connect up to 80 keys and 64 LEDs. The connectors are connected to the machine
control panel with ribbon cables.
All keys signal "high" in the idle state (= open). When actuated, the state changes to "low".
Short-stroke keyboards and membrane keyboards can be connected. 5 V signals can also be
applied to the inputs. The inputs are TTL-compatible, but not 24 V-tolerant.
Connectable components
7.3 MCP Interface PN
PPU
Manual, 01/2014, 6FC5397-2DP40-3BA3 141
To Next Page
Loading...
