Type plate
The NX10.3 module type plate contains the following basic information:
&RPSRQHQWQDPH
2UGHUQXPEHU
,'QXPEHU
+:YHUVLRQ
6HULDOQXPEHU
Figure 7-52 NX10.3 type plate
Note
You might need to access the information provided on the side-mounted type plate after the
equipment has been mounted. Since the type plate is located on the right-hand side of the
housing, which is the side typically used to connect to the SINAMICS S120 module, we
recommend that you make a note of the serial number of the NX10.3 prior to assembly.
Connectable components
7.8 NX10.3
PPU
Manual, 01/2014, 6FC5397-2DP40-3BA3 215
To Next Page
Loading...
Need help?
General
