Configuration
5-12 7SJ63 Manual
C53000-G1140-C120-1
Figure 5-11 Excerpt from the General Circuit Figure for Models 7SJ632, 7SJ633, 7SJ635,
and 7SJ636 with Output Relays R4 ~ R7 and their Configuration per Figure 5-
12.
Figure 5-12
Double Command with Single Outputs using two Output Relays with two Contacts Each
5.2.2 Structure and Operation of the Configuration Matrix
General This section deals with the structure and operation of the configuration matrix. The
configuration matrix can be viewed without making any configuration changes. Infor-
mation characteristics and configuration steps are described in Section 5.2.3, and
configuration is demonstrated in Section 5.2.4.
Configuration of information is performed, using a PC and the DIGSI
®
4 software pro-
gram, via the operator or service interface. The configuration is represented in
DIGSI
®
4 as a matrix (Figure 5-13). Each row is assigned to relay information. It is
identified by a function number, brief text (display text), an explanation (long text, min-
imized in Figure 5-13), and an information type. The columns give the interfaces which
7SJ632/3/5/6
CLOSE
OPEN
V+V–
J2
(BO4)
J3
J4
K18
K17
BO5
BO6
(BO7)
J1
CLOSING
Command
C+
TRIP
Command
C–
t
C+1 C–1
V+
V–
C+2
Relay Configuration:
C–2
The relays marked with – must not be used!
C+
BO 4
C–
X
5
67
X
–
–
CLOSE TRIP
Switching Device
COIL COIL
www . ElectricalPartManuals . com
To Next Page
Loading...
