Appendix
A-4 7SJ63 Manual
C53000-G1140-C120-1
A.1.1 Accessories
Terminal Block Co-
vering Caps
Short Circuit Links
Femal Plugs
Mounting Rail for
19"-Racks
Battery
Interface Cable An interface cable is necessary for communication between the SIPROTEC device
and a PC. Requirements for the computer are Windows 95 or Windows NT4 and the
operating software DIGSI
®
4.
Operating Software
DIGSI
®
4
Software for setting and operating SIPROTEC
®
4 devices
Covering cap for terminal block type Order No.
18 terminal voltage, 12 terminal current block C73334-A1-C31-1
12 terminal voltage, 8 terminal current block C73334-A1-C32-1
Short circuit links for terminal type Order No.
Voltage terminal, 18 terminal, or 12 terminal C73334-A1-C34-1
Current terminal,12 terminal, or 8 terminal C73334-A1-C33-1
Connector Type Order No.
2 pin C73334-A1-C35-1
3 pin C73334-A1-C36-1
Name Order No.
Angle Strip (Mounting Rail) C73165-A63-C200-2
Lithium-Battery 3 V/1 Ah, Type CR 1/2 AA Order No
VARTA 6127 501 501
SONNENSCHEIN 1110 150 301
Interface cable between PC or SIPROTEC device Order No.
Cable with 9-pin male/female connections 7XV5100-4
Operating Software DIGSI
®
4
Order No.
DIGSI
®
4, basic version with license for 10
computers
7XS5400-0AA00
DIGSI
®
4, complete version with all option packages
7XS5402-0AA0
www . ElectricalPartManuals . com
To Next Page
Loading...
Need help?
General