Operators Tools
7-50 7SJ63 Manual
C53000-G1140-C120-1
7.3.9 Other Commands
The device is equipped with a serial interface for connection to SCADA. From there,
the device can receive standardized commands (according to the supported protocol)
and transmit them to the respective switching devices, or activate internal functions,
e.g. block inputs/outputs or set tags (manual overwrite), or release processing of func-
tions in the CFC. This command processing is determined during project planning and
configuration of the matrix.
n
www . ElectricalPartManuals . com
To Next Page
Loading...
