Configuration
5-157SJ63 Manual
C53000-G1140-C120-1
ations are used for the information types:
• Messages:
− SP
Single Point Indication
− DP
Double Point Indication
− OUT
Output Indication
− IntSP
Internal Single Point Indication
− IntDP
Internal Double Point Indication
− TxTap
Transformer Tap Changer
− Ev
Event
• Commands:
− C_S
Single Command with Single Output without feedback
− CF_S
Single Command with Single Output with feedback
− C_SN
Single Command with Single Output Negated without
feedback
− CF_SN
Single Command with Single Output Negated with feedback
− C_D2
Double Command (2 relays) with Single Outputs without
feedback
− CF_D2
Double Command (2 relays) with Single Outputs with
feedback
− C_D12
Double Command with Single Trip Outputs and Double Close
Outputs without feedback
− CF_D12
Double Command with Single Trip Outputs and Double Close
Outputs with feedback
− C_D3
Double Command (3 relays) with Single Outputs and
Common Output without feedback
− CF_D3
Double Command (3 relays) with Single Outputs and
Common Output with feedback
− C_D4
Double Command (4 relays) with Double Outputs without
feedback
− CF_D4
Double Command (4 relays) with Double Outputs with
feedback
− C_D2N
Double Command (2 relays) with Single Outputs Negated
without feedback
− CF_D2N
Double Command (2 relays) with Single Outputs Negated
with feedback
• Measured Values:
− MV
Measured Value
− MVU
Measured Value, User Defined
− MVT
Measured Value with time
− LV
Limit Value
− LVU
Limit Value, User Defined
• Metered Values:
− MVMV
Metered Value of Measured Values
− PMV
Pulse Metered Value
www . ElectricalPartManuals . com
To Next Page
Loading...
