Siemens siprotec 7SJ63 - Page 591

Appendix
A-977SJ63 Manual
C53000-G1140-C120-1
– C_SN ON/OFF ––XX–X–XXX
– C_SN Open/Close ––XX–X–XXX
Double Controls 1 Trip 1 Close
– C_D2 ON/OFF ––XX–X–XXX
– C_D2 Open/Close ––XX–X–XXX
– C_D2 Transformer Tap Changer ––XX–X–XXX
Double Controls 1 Trip 1 Close 1 Common
– C_D3 ON/OFF ––XX–X–XXX
– C_D3 Open/Close ––XX–X–XXX
– C_D3 Transformer Tap Changer ––XX–X–XXX
Double Controls 2 Trip 2 Close
– C_D4 ON/OFF ––XX–X–XXX
– C_D4 Open/Close ––XX–X–XXX
– C_D4 Transformer Tap Changer ––XX–X–XXX
Double Controls 1 Trip 2 Close
– C_D12 ON/OFF ––XX–X–XXX
– C_D12 Open/Close ––XX–X–XXX
– C_D12 Transformer Tap Changer ––XX–X–XXX
Double Controls negated
– C_D2N ON/OFF ––XX–X–XXX
– C_D2N Open/Close ––XX–X–XXX
– C_D2N Transformer Tap Changer ––XX–X–XXX
Type of Information Source Destination CFC Task level
Binary Inputs Function Keys CFC Binary Outputs LED CFC Measurement PLC1 (slow) PLC (fast) Interlocking
1
) Only for measurement setpoints (is processed cyclically every 600 ms); do not use for binary inputs.
2
) Only for commands (is triggered by commands only).
www . ElectricalPartManuals . com