Siemens SITOP series - Page 108

Working with the library
7.2 SIMATIC STEP 7
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
108 Function Manual, 11.2018, A5E37763954-09-76
Calling up blocks
Table 7- 4
Step number
Instruction
1 Drag-and-drop the "SITOP_PSU8600" function block into your network. The "Call options" dialog box ap-
pears.
2 In the "Call options" dialog box, keep the default settings and click "OK".